The function of the router is related to network and internet usage. The router itself is a piece of hardware that is in charge of connecting the network. Routers can connect the same network or different networks.
The function of a router is simply to direct or create a route for the network to arrive at its destination. A router is usually connected to two or more data lines from different IP networks. Where routing is the process of sending data packets through the network from one device to another. The function of the router is to direct traffic in a network, including the internet.
In the past, routers were synonymous with LAN cables as network traffic controllers. However, for now router technology is more sophisticated, not only with LAN cable but at the same time with Wireless. A popular example is of course the use of the internet network at home with WiFi.
Router Functions
The function of the router is of course very important in using the internet. The function of the router not only makes you more fluent in using the internet, but also as a liaison between 2 or more networks. Here are the router functions that you need to understand:
– Connect network to DSL
The first function of the router is as a network link to DSL. The router connects a local network with a DSL (Digital subscriber line) connection or better known as a DSL router. With the rapid development of technology, now you can not only use a wired LAN connection, but you can also use wireless technology.
– Delivering information
The next function of the router is as an introduction to information. Routers can deliver or transmit data from one network to another, where the system works much like a network bridge or bridge.
– Connect network
As you know, basically the function of a router is as a network liaison. The function of the router is to connect several networks so that you can send data packets from one network to another.
It should also be noted that each router has several facilities, namely DHCP (Dynamic Host Configuration Protocol) and NAT (Network Address Translator) facilities. DHCP facility is a service that can distribute other IP addresses to computer devices. Meanwhile, NAT is a facility that allows an IP address or internet connection to be shared to another IP address. By obtaining another IP address, one device can connect to other devices.
The need for digital IT is needed in daily activities, Bead IT Consultant is the right choice as your partner, visit our website by clicking this link: www.beadgroup.com