A spaceship cargo derived from the supply of robotic China successfully docked in orbit with module space station on Monday (20/9). This became the fourth mission of the 11 required to complete the construction of the space station’s first permanent state that by the end of 2022.
Spaceship cargo Tianzhou-3 was launched from launch center beach Wenchang. The launch was quite successful with the completion of the maneuver less than seven hours, using six orbital maneuvers after reaching orbit to approach the Tianhe.
Tianzhou-3 takes about six tons of supplies to the mission of Shenzhou-13 will come, when the construction of the space station China continues. This plane consists mostly of supplies new for the astronaut to plan a space mission human is the longest in China.
Other load in the plane including the tools or equipment for the experiment. The mission of Shenzhou-13 for six months will be launched from Jiuquan in the Gobi Desert most rapid early October.
Spacecraft and rocket Long March 2F has been in the ready state at the Jiuquan for some time to allow quick response to the state of emergency in orbit.
The crew reportedly including one of the two astronauts Chinese women. Wang Yaping, a veteran of the mission of Shenzhou-10 2013, is in training for the mission of the space station.
The mission of the Tianzhou-3 is the fourth for the construction of a space station in China. Tianhe, the first module of the station weighing 22.5 tons, was launched at the end of 28 April and are currently in orbit 386 times 380 kilometers with a slope of 41.5 degrees.
First manned mission, Shenzhou-12, back to Earth on 17 September after 90 days anchored in Tianhe. After that, the spacecraft Tianzhou-2, which provides supplies and equipment for the crew, derived from the harbour behind Tianhe on Wednesday (18/9) and to maneuver around and anchored to the front, paved the way for the Tianzhou-3.
Tianzhou-2 and Tianzhou-3 will remain docked with the Tianhe which has a length of 16.6 meters and a diameter of 4.2 meters, until after the arrival of the Shenzhou-13. Tianzhou-2 will be used for the verification test of the robotic arm the main space station before orbiting.
The projections are not official Shenzhou-13 runs from October to March 2022. The mission of the supply Tianzhou-4 then will follow about a month later, with the Shenzhou-14 takeoff in May next year, in which a manned mission will oversee the development of major construction for the space station.
Dau module experiments, Wentian and Mengtian, will be launched respectively in May-June and August-September. Finally, Tianzhou-5 will be launched in October in preparation for the Shenzhou-15 in November 2022, completing the construction phase.
China has hinted at plans to expand the complex Tiangong into six modules. The expansion will use the backup module or have the potential to enter international contributions.
The need for digital IT is needed in daily activities, Bead IT Consultant is the right choice as your partner, visit our website by clicking this link: www.beadgroup.com.